HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

LUN Manager (LUNM) Function86
Add World Wide Name (WWN) Operation
[LUNM]
Logical Unit Number Manager function
Add WWN
Add World Wide Name operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 42.
Table 42 Detailed Information for Add WWN Operation
CU:LDEV The CU and LDEV numbers of the logical volume linked to the host group.
Num. of Paths The number of LU paths set.
Item Description
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Add WWN,,Normal
end,Seq.=xxxxx
+{Port,HostGrpID,WWN,Nickname
}=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num. of WWNs=2
Item Description
Port The name of the port where the host group has been added.
HostGrpID The host group number newly added.
WWN Indicates WWN of the host bus adapter for the host registered in the host group. WWN
is a 16-digit number in the hexadecimal format.
Nickname The nickname of the host bus adapter for the host registered in the host group.
Num. of WWNs The number of registered hosts (WWN).