HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 67
SLPR#xx: Enable is selected as the parameter. The operation uses the following parameters, as
shown in Table 24.
Table 24 Parameters for Expiration Lock Operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Release All Extents Operation
[LSE]
LUN Security Extension function
Release All Extents
Release All Extents operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 25.
Parameter Description
SLPR#xx:Enable The expiration lock setting is enabled for SLPR number xx.
SLPR#xx:Disable The expiration lock setting is disabled for SLPR number xx.
SYSTEM:Enable The expiration lock setting is enabled in the disk subsystem.
SYSTEM:Disable The expiration lock setting is disabled in the disk subsystem.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LSE], Release All
Extents,,Normal end,Seq.=xxxxx
+{CU:LDEV,Operation,Result}=[{0x00:0x00,0x80,Normal end},
{0x01:0x01,0x80,Error(9605-58435)},{0x02:0x02,0x80,Normal end}],Num. of
LDEVs=XXX