HP StorageWorks Audit Log reference guide (5697-5923, June 2006)
Continuous Access XP - Journal Function188
Journal-Vol Operation
[CAXJ]
Continuous Access Journal function
Journal-Vol
Journal-Vol operation
Add
Add is selected as the parameter. The operation uses the following parameters as shown in
Table 134.
Copy Pace The speed of initial copy. 150: Low speed, 500: Medium speed, 1500: High speed
Path Blockade
Watch(m)
The path blockade watch period set. The unit is minute.
Forward Path Blockade
Watch
Whether to transfer the path blockade watch period set to the master journal group to the
restore journal group. Yes: Transfer, No: Do not transfer.
Use of Cache Whether to store the journal data in the restore journal group in cache.
Use: Store the journal data in cache. Not used: Store the journal data in journal volume
Speed of Line(Mbps) The transfer speed of the communication line. The unit is megabits per second (Mbps).
Result The result of operation. Normal end: Normal end Error(xxxx-yyyyy): Abnormal end
xxxx: Part code yyyyy: Error code
Num. of JNL Grps The number of journal groups.
Item Description
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00, [CAXJ],Journal-Vol,Add,,Normal
end,Seq.=xxxxxx
+JNLG=0x00
++{CU:LDEV,Result}=[{0x00:0x01,Normal end},{0x00:0x02,Normal
end},{0x00:0x03,Normal end}]
+JNLG=0x01
++{CU:LDEV,Result}=[{0x01:0x01,Normal end},{0x01:0x02,Normal
end},{0x01:0x03,Normal end},
{0x01:0x04,Normal end},{0x01:0x05,Normal end},{0x01:0x06,Normal
end},{0x01:0x07,Normal end},(snip)
-{0x01,0x0B,Normal end}]
+Num. of JNL Grps=2