HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Continuous Access XP Function170
Pairsplit-S Operation
[CAXP]
Continuous Access XP function
Pairsplit-S
Pairsplit-S operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Type The volume type of the volume on the primary site.
P-VOL: Primary volume, S-VOL: Secondary volume
S-VOL Write Indicates whether writing to the secondary volume is enabled.
Enable: Write enable, Disable: Write disable
Kind The suspend type set.
P-VOL Failure: P-VOL write disable, S-VOL: P-VOL write enable
Range The suspend rage set. This value is output when the asynchronous pair is split only.
Group: Group (all asynchronous pairs in the consistency group),
LU: LU (specified asynchronous pair only)
Mode The setting of unreflected data handling. This value is output when the asynchronous pair
is split only.
Drain, Purge
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end xxxx: Part code yyyyy: Error code
Num. of Pairs The number of split pairs.
Item Description
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CAXP],Pairsplit-S,,Normal
end,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type,Force,Range,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,No,Group,Normal
End},{1A-0x00-0x001,No,Group,
Normal End},
+{1A-0x00-0x002,No,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx