HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 119
18 Remote Control Unit (RCU) Function
Add Path Operation
Example 1 (when CU Free is used)
Example 2 (when CU Free is not used)
[RCU]
Remote Control Unit function
Add Path
Add Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 77.
Table 77 Detailed Information for Add Path Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add Path,,Normal
end,Seq.=xxxxx
+{S/N,Path Gr. ID,Controller ID}={99999,Default,4}
++{MCU Port,RCU
Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add Path,,Normal
end,Seq.=xxxxx
+{S/N,SSID,Controller ID}={99999,0x0004,4}
++{MCU Port,RCU
Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
Item Description
S/N Indicates a serial number of the device.
Path Gr. ID The path group ID. When the path group ID is default setting, "Default" is output.
Controller ID The controller ID.