HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

LUN Manager (LUNM) Function106
Set Speed Mode Operation
[LUMN]
Logical Unit Number Manager function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 67.
Table 67 Detailed Information for Set Security Switch Operation
Set TCP/IP Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [LUNM],Set Speed Mode,,Normal
end,Seq.=xxxxx
+CHA=CHA-1E
++{Port Block,Mode}=[{A,High Speed},{B,High
Speed},{C,Standard},{D,Standard}],Num. of Blocks=4
+CHA=CHA-1H
++{Port Block,Mode}=[{A,Standard},{B,High Speed}],Num. of Blocks=2
+Num. of CHAs=2
Item Description
CHA The CHA name (name of channel adapter).
Port Block The port block. Port block A, B, C, and D are output in case of a 16-port channel
adapter. In case of an 8-port channel adapter, port block A and B are output.
Mode The mode set to the port.
Standard: Standard mode, High Speed: High speed mode
Num. of Blocks The number of port blocks in the channel adapter.
Num. of CHAs The number of channel adapters that the mode is changed.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set TCP/IP Port,,Normal
end,Seq.=xxxxx
{Port,PortNumber}=[{1A,2054},{3A,2055},{1B,4010},{3B,4011}],Num. of Ports=4