Hitachi Universal Replicator (TM) for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5278-96044, May 2011)

Table 46 ResumePair Tag Parameters and Settings (continued)
Range/Character numbersSettingParameterColumn
00000 – 99999Serial number of the remote storage systemDKCSNG
N/A
• Normal: the pair in Suspend will be
resynchronized.
ResyncMode
1
H
N/A
• Group: all pairs in the same mirror will be
resynchronized.
• Volume: only the specified pair in the mirror
will be synchronized.
Range
2
I
1 – 256
3
Priority of the operationPriorityJ
N/A
• Group: all pairs in the same mirror will be
split when the error occurs.
• Volume: only the pair specified in the mirror
will be split when the error occurs.
ErrorLevelK
N/ASpecify the current setting (Only_P-VOL or
Copy_to_S-VOL). For information about the
meaning of each setting, see “AddPair Tag
Parameters and Settings” (page 215).
CFWL
1 Use Business Continuity Manager to resynchronize a pair for the delta resync operation.
2 If Group is specified for Range, the settings for Priority, ErrorLevel, and CFW will be ignored.
3 When creating a pair, a smaller priority number indicates a higher priority. When creating many pairs at a time,
specifying the Priority parameter may not be enough to manage the priority of pair creation. To be assured of establishing
priority for specified pairs, HP recommends separate spreadsheets for high-priority pairs and other pairs.
Save time by using the pair information to write the parameters of the ResumePair tag. For details
see “Pair Tag Parameters and Contents” (page 214).
Releasing Pairs (DeletePair Tag)
You can perform the CLI by using the spreadsheet with DeletePair tag from either the primary or
secondary site. The table below shows the items and detailed information for the DeletePair tag
settings.
Table 47 DeletePair Tag Parameters and Settings
Range/Character numbersSettingParameterColumn
00 – 01LDKC number of the primary data volumeLDKCA
00 – FECU number of the primary data volumeCUB
00 – FFLDEV number of the primary data volumeLDEVC
00 – 03Mirror IDMirrorIDD
N/A
• P-VOL: The data volume in the local storage system
is the primary data volume.
• S-VOL: The data volume in the local storage system
is the secondary data volume.
VolType
1
E
00 – 01LDKC number of the remote storage systemLDKC(Pair)F
00000 – 99999Serial number of the remote storage systemDKCSNG
218 Using Spreadsheets for Universal Replicator for Mainframe Operations