Hitachi Universal Replicator for z/OS User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1778-96021, May 2011)

The remote copy connection between primary storage system and secondary storage system
provides three different configurations:
• Direct connection (see “Direct Remote Copy Connections” (page 49)),
◦ Switch connection (see “Switch Remote Copy Connection” (page 49)),
◦ Extender connection (see “Extender Remote Copy Connection” (page 49)).
* To set ports, use LUN Manager and set port topology to: Fabric off, FC-AL.
Figure 9 Direct Remote Copy Connections
Figure 10 Switch Remote Copy Connection
Figure 11 Extender Remote Copy Connection
CAUTION: When a MCU and RCU are connected via switches with channel extender, and
multiple remote copy paths are assembled, the capacity of data to be transmitted may concentrate
on particular switches, depending on the configuration and the settings of switch routing.
Enabling the URz Option(s)
Enabling the URz Option(s) 49