Hitachi TrueCopy for z/OS User Guide (T1711-96024, November 2011)

Hitachi TrueCopy for z/OS user guide 159
Add Group ----- ----- MCU Must be performed using the TC390
software. The group options are selected
during add group (see ”Adding consistency
groups (Add CT Group)” on page 105).
Group Status ----- ----- MCU/RCU Must be performed using the TC390 software
(see ”Viewing consistency group status (CT
Group Status)” on page 103).
Delete Group ----- ----- MCU Must be performed using the TC390 software
(see ”Deleting consistency groups (Delete CT
Group)” on page 107).
Add Pair CESTPAIR
(MODE=
COPY)
PPRCOPY
ESTPAIR
M-VOL Establishes a TC390 pair and sets the initial
copy and pair options (copy mode =
synchronous or asynchronous only, priority =
0, CFW data = copy to R-VOL, DFW to R-VOL
= not required). TC390 supports the optional
MODE, PACE, and CRIT parameters. The
MSGREQ parameter defaults to NO (not
applicable to TC390A). For details on using
CESTPAIR for TC390A, see ”CESTPAIR” on
page 165.
Suspend Pair CSUSPEND PPRCOPY
SUSPEND
M-VOL or
R-VOL
Suspends a TC390 pair (or TC390A group).
TC390 supports the optional PRIMARY
parameter. See Caution below on the
QUIESCE parameter. For details on
CSUSPEND for TC390A, see ”CSUSPEND
on page 167.
Delete Pair
(to MCU)
CDELPAIR PPRCOPY
DELPAIR
M-VOL Deletes a TC390 pair (or TC390A group)
from the MCU. For details on using CDELPAIR
for TC390A, see ”CDELPAIR” on page 167.
Delete Pair
(to RCU)
CRECOVER PPRCOPY
RECOVER
R-VOL Deletes a TC390 pair (or TC390A group)
from the RCU. For details on using
CRECOVER for TC390A, see ”CRECOVER
on page 168.
Pair Status CQUERY/
VOLUME
PPRCOPY
QUERY/
VOLUME
M-VOL or
R-VOL
Displays the TC390 and TC390A pair status
of the volume. TC390 supports the optional
FORMAT/UNFORMAT and VOLUME/PATHS
parameters. For details on using CQUERY for
TC390A, see ”CQUERY for serial interface
on page 169.
Resume Pair CESTPAIR
(MODE=
RESYNC)
PPRCOPY
ESTPAIR
M-VOL Resumes a TC390 pair (or TC390A group),
and sets the TC390 initial copy options and
pair options. TC390 supports the optional
MODE, PACE, and CRIT parameters. For
details on using CESTPAIR/RESYNC for
TC390A, see ”CESTPAIR on page 165.
Table 33 TrueCopy operations versus PPRC TSO and ICKDSF commands (continued)
TC390
Operation
TSO
Command
ICKDSF
Command
Command
Issued to:
Description