Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

B-10 TrueCopy for z/OS Scripting
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
Start $Script="HRC",$Svr="CU-Name"
// $Dev
SetList $D =_ilDevA, $S = {0x000100,0x000101,0x000102,0x000103,0x000104,0x000105,0x000106,0x000107}
AddList $D =_ilDevA, $S = {0x000108,0x000109,0x00010A,0x00010B,0x00010C,0x00010D,0x00010E,0x00010F}
// $Rdev
SetList $D =_ilDevB, $S = {0x001F00,0x001F01,0x001F02,0x001F03,0x001F04,0x001F05,0x001F06,0x001F07}
AddList $D =_ilDevB, $S = {0x001F08,0x001F09,0x001F0A,0x001F0B,0x001F0C,0x001F0D,0x001F0E,0x001F0F}
// $Priority
SetList $D =_ilWorkA, $S = {1,2,3,4,16.32}
// $Fence
SetList $D =_slWorkB, $S = {"D","S","S","N"}
CreateHrcPair $Dev = _ilDevA, $RcuSn = "12345", $RcuSsid = 4, $Rdev = _ilDevB, $Priority = _ilWorkA, $Fence = _slWorkB
StartHrcPair
// $Dev
SetList $D =_ilDevA, $S = {0x000B80,0x000B81,0x000B82}
AddList $D =_ilDevA, $S = {0x000C2A,0x000C2B,0x000C2C}
// $Rdev
SetList $D =_ilDevB, $S = {0x001045,0x001047,0x00105E}
AddList $D =_ilDevB, $S = {0x001130,0x001139,0x00113D}
// $RcuSn
SetList $D =_slWorkD, $S = {"32072","32072","32072","28439","28439","28439"}
// $RcuSsid
SetList $D =_ilWorkC, $S = {33,33,33,0xA74C,0xA74C,0xA74C}
// $CTG
SetList $D =_ilWorkB, $S = {0x7F,0x7F,0x7F,10,10,10}
CreateHrcPair $Dev = _ilDevA, $RcuSn = _slWorkD, $RcuSsid = _ilWorkC, $Rdev = _ilDevB, $Sync = "S2", $CTG = _ilWorkB
StartHrcPair
End
Figure B-1 Example of CreateHrcPair Command