Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

5-38 Performing TrueCopy for z/OS Configuration Operations
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
5. On the CT Group Option dialog box, select the desired group options. For
further information on the consistency group options. You can only change
the port type when the group does not contain any pairs.
6. Click Set to close the CT Group Option dialog box. (Click Cancel to cancel the
group option operation.) The preview list displays the requested change
group option operation(s).
7. Verify the requested operation(s) displayed in the preview list.
To change the group option operation(s), select the operation(s) from the
preview list, right-click, and click Modify. To remove one or more
operations, select the operation(s) from the preview list, right-click, and
click Delete. To cancel all operations, select all the operations in the
preview list, right-click, and click the Delete command, or click the Cancel
button.
8. To apply the settings, click Apply.
9. When you are finished changing the CT group options, you can resynchronize
all pairs in the group(s).
Viewing Consistency Group Status
The CT Group Status dialog box (see Figure 5-10) displays the detailed status
information for the selected TrueCopy for z/OS Async consistency group.
To view the detailed consistency group status information:
1. Click the Asynchronous Operation tab, and select the LDKC that the
consistency groups you want to operate belong to, or Used in the tree.
2. Select the desired CT group in the list. Note: Select only one consistency
group.
3. Right-click the group, click CT Group Operation, and then click CT Group
Status to open the CT Group Status dialog box.