Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

Performing TrueCopy for z/OS Configuration Operations 5-21
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
Adding and Deleting SSIDs for an RCU
Before adding an SSID, make sure that the remote copy connection is properly
installed. You can add three SSIDs to each RCU. Before deleting an SSID,
make sure that the remaining SSIDs are still valid, or the connection between
the MCU and RCU may be lost.
The Add SSID dialog box (see Figure 5-5) allows you to add up to three SSIDs
to an existing RCU. To open the Add SSID dialog box, select the MCU&RCU
display on the RCU Operation window, select and double-click the desired
MCU CU in the tree, select the desired RCU, right-click the SSID and path list,
and then click the Add SSID command.
Figure 5-5 Add SSID Dialog Box
To add one or more SSIDs to an existing RCU:
1. Click the RCU Operation tab, and click the MCU&RCU display button.
2. Select and double-click the desired MCU CU in the tree, and select the RCU to
which you want to add SSID(s). Alternatively, select the RCU in the list,
right-click and click Edit SSID(s) & Path(s). All SSIDs for the selected RCU
are listed.
3. Right-click the SSID and path list, and then click Add SSID to open the Add
SSID dialog box.
4. On the Add SSID dialog box, enter the new SSID(s).
5. Click Set to close the Add SSID dialog box. The preview list now displays the
requested add SSID operation(s).
6. Verify the requested operation(s) displayed in the preview list.