Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

Performing TrueCopy for z/OS Configuration Operations 5-3
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
To perform any operation on the RCU Operation window:
1. Click the desired display mode: MCU&RCU, or Port.
2. Select the desired CU, or channel adapter from the tree.
3. Select the desired RCU(s) or port(s) from the list. When adding an RCU, do
not select anything from the list.
4. Right-click the selected item(s) to display the pop-up menu.
For the MCU&RCU display, the pop-up menu commands are:
– RCU Status: allows you to display the RCU status.
– RCU Operation: allows you to perform the following RCU operations:
add RCU, change RCU option, and delete RCU.
– Edit SSID(s) & Path(s): allows you to add and delete paths, and allows
you to add and delete SSIDs.
For the Port display, the pop-up menu commands are:
– Initiator: allows you to change the selected fibre port(s) to initiator
ports.
– RCU Target: allows you to change the selected fibre port(s) to RCU
targets.
– Target: allows you to change the selected fibre port(s) to target ports.
5. For the MCU&RCU display, click the menu command for the desired
operation. When two or more RCUs are selected, only the RCU Operation
command is available. For the add and change operations, use the dialog box
to perform the operation, and click Set to close the dialog box. There is no
dialog box for the delete operations. The RCU Operation preview list now
displays the requested operation(s). To cancel the add or change operations,
click Cancel.
For the Port display, select the desired port type. The RCU Operation
preview list displays the requested port change operation(s).
6. Verify the specified RCU or port operation(s) in the preview list. Make
changes as follows:
a. For the MCU & RCU display, to change an operation, select the desired
operation (RCU, path, SSID), right-click it, click Modify, make the
desired changes, and close the dialog box. The preview list displays the
updated information.
For the Port display, to change the port type, select the desired port,
right-click it, and select the desired port type. The preview list displays
the updated information.
b. To omit one or more operations, select the operation(s) to be omitted
(RCU, path, SSID, port), right-click, and click Delete. The operation(s)
is/are removed from the preview list. If all operations are removed, the
list returns to its original display.