Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

4-24 Using TrueCopy for z/OS GUI
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
– Stop: Stop the TCz script file being executed. The script operation is
stopped on the script line basis. If script execution has been completed,
Stop cannot be selected.
• Result: displays the error code (four-digit hexadecimal number).
• Information: displays the script information.
– Message: displayed when script execution has been completed. Normal
End indicates that the operation completed normally. When the script
ended abnormally due to an error in the script file, a message indicating
the abnormal end is displayed. When the script is stopped by the Stop
command, Abort by operator is displayed.
– Date: The date when the script status changed.
– Line: The script file line number being executed.
– Loop: The current/total repetition count for a looped command (e.g.,
150/300).
– Macro: The macro being executed. Macros which execute a process for a
device are listed: CreateHrcPair, ChangeHrcPair, SuspendHrcPair,
ResumeHrcPair, and DeleteHrcPair.
• File Operation button: allows you to download the trace file and upload the
script file.
Note: You can perform the file operation only if you can access the local
client file in the Storage Navigator computer. If you cannot access the local
client file, the File Operation button will not be displayed on the Script
Operation window. For further information on the settings for accessing
local client files, please refer to the Storage Navigator User's Guide.
• Apply button: applies settings in the Script Operation window to the
storage system. The specified script is executed.
• Cancel button: cancels the settings in the Script Operation window. The
script is not executed.