HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
FlashCopy, or XP Snapshot
exists. Release the reserve
volume setting and then
retry the operation.
Mainframe, Compatible
FlashCopy, or XP Snapshot,
then
retry the operation.
3205 56520
The reserved
volume setting
of
Auto LUN is defined.
Release the reserved volume
setting of Auto LUN, and
then
retry the operation.
Release the reserved volume
setting of Auto LUN, then
retry the operation.
E 5
Table 37 Error Codes — Part Code 3210
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
3210 55001
The specified V-VOL group
cannot
be deleted.
A
V-VOL group cannot be
deleted
when it contains:
• a
path defined volume,
•
aLUSEvolume.
Check the specified content,
and
retry the operation.
W
5
3210 55002
The maximum number of
V-VOL Groups is already
registered.
Check the setting range,
then
retry the operation.
W
5
3210 55101
The setting of V-VOL group
is
incorrect.
Check the settings, and retry
the
operation.
W
5
3210 55201
V-VOL cannot be configured
because the specified value
is
invalid.
It cannot
be configured
when one of the following
err ors occur:
•
The setting capacity of
the
V-VOL is outside the
range.
•
The number of created
V-VOLs is outside the
range.
•
The number of V-VOLs
exceeds the m aximum
number of V-VOLs that
can be created in the
whole subsystem.
•
The specified capacity
exceeds the remaining
capacity.
Check the specified content,
and
retry the operation.
W
5
3210 55301
There are V-VOLs whose
CU:LDEV numbers are not
set.
Check the settings, and retry
the
operation.
W
5
3210 55302
The selected CU:LDEV
number has already been
used.
Check the specified content,
and
retry the operation.
W
5
3210 55303
The CU:LDEV number is
outside the valid range.
Check the specified content,
and
retry the operation.
W
5
154
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes