HP StorageWorks XP24000 Continuous Access Software User and Reference Guide, v01 (T5278-96002, June 2007)

list, right-click, and click Delete. To cancel all operations, select all the operations in the preview
list, right-click, and click the Delete command, or click the Cancel button.
8. To apply the settings, click the Apply button.
9. When you a re finished changing the CT group options, you can resynchronize (resync) all pairs
in thegroup(s)(Pairresync). See“Resynchronizing Continuous Access Pairs”onpage117 for
instructions on resynchronizing pairs.
Viewing Consistency Group Status
The CT Group Status dialog box (see Figure 35 on p age 88) displays the detailed status information for
the selected
Continuous Access Asynchronous consistency group.
To view the de
tailed consistency group status information:
1. Select the L
DKC where the desired consistency group belongs, or select Used from thetreeinthe
Asynchronous Operation tab to display the existing consistency groups in the list.
2. Select the desired CT group in the list.
Note: Select only one consistency group.
3. Right-cli
ck
the group, click CT Group Operation, and then click CT Group Status to op en the CT
Group Status dialog box.
Figure 35 CT Group Status Dia lo g B ox
CT Group: Group number of the selected c onsistency group.
This CU Type: CU type (MCU or RCU) of the selected consistency group.
LDKC: The number of the LDKC where the consistency group belongs.
CLPR: The number and name of the CLPR to which the volumes forming pairs belong.
S/N, ID: Serial number and SSID of the CUs or Path Gr. of the selected consistency group. The LDKC
number is also displayed enclosed by parentheses to the right of the CU number.
Port, GI D, LUN: Pairs in the connected CU tha t are in the selected consistency group. The GID column
shows the host group name in parentheses.
Note: The GID which is indicated in hexadecimal t wo-digit number is automatically allocated when you
create the host groups by using LUN Manager.
LUN columns shows the CU:LDEV in pa rentheses. For LUs with more than one path, only the first path is
listed.
88
Performing Continuous Access Configuration Operations