HP StorageWorks XP24000 Continuous Access Software User and Reference Guide, v01 (T5278-96002, June 2007)

Figure 49 D etailed Informa tion Di alog Box
P-VOL and S-VOL:
• Port - GID - LUN (lowest LDEV number for a LUSE pair).
• Device emulation type.
• Capacity in MB (to two decimal places).
• The number of blocks.
Note: If # is added to the end of the number for a n LDEV (for example, 00:00:3C#), the LDEV is an
external volume. For details on external volumes, see the H P StorageWorks XP24000 External Storage
Software User’s Guide.
CLPR: The CLPR number and the CLPR name of the volume on the primary site are displayed.
Group Name: Displays the host group name if the port on the primary site connects a host group
Pair Status: SMPL, COPY, PAIR, PSUE, PSUS, PDUB, Suspending, or Deleting (see “Pair Status”onpage27
for further information on Continuous Access pair status) . If the pair is split or suspended, the
split/suspended type is also displayed.
Pair Synchronized: Progress of the initial copy operation (percentage and progress bar).
RCU S/N and ID: Serial number and SSID of the RCU (or MCU if an S-VOL is selected) or Path g roup ID.
Controller I D : allows you to select the controller ID of the RCU. The c ontroller ID for an HP XP24000
Disk Array is 5 and the controller ID for an HP XP12000 Disk Array is 4. The model name is displayed
next to the controller ID.
MCU-RCU Path: Channel type of the path interface between the storage systems (fibre).
Update
Type: Synchronous or Asynchronous.
Copy Pace: 1-15 tracks (disabled when status becomes PAIR) .
Initial
Copy Priority: 1-256 (disabled when the status becomes PAIR).
XP24000ContinuousAccessSoftwareUserand ReferenceGuide
113