HP StorageWorks XP24000 Continuous Access Software User and Reference Guide, v01 (T5278-96002, June 2007)

CT Group: Allows yo u to select the consistency group (or all groups) to be displayed. This applies
only to Asynchronous pairs.
MCU-RCU Path: Displays the path type. You are not allowed to set this option with the current microcode
version.
CLPR: Allows you to select the CLPR (or all CLPRs) .
Internal/External VOL: Allows you to select the volume type, internal or external (or all types), to be
displayed.
Status: Allows you to display only volumes which have the selected pair status: SMPL, COPY, PAI R,
PSUS/PSUE, PDUB (LUSE only), Suspending (async only), a nd/or Deleting (async only) .
Note: When
PDUB is selected, simplex volumes are not displayed.
Sub Status: Allows you to select the consistency status of the Asynchronous pairs.
The Set button applies your selections to the volume list and closes the Display Filter dialog box. The
Reset button clears your selections and displays the default settings (ALL).
Snapshot Function
The Continuou
s
Access snapshot function writes the user-selected Continuous Access pair status
information to a text file on the SVP, which you can then download. The status information reported in this
file is determined by the selections on the Display Filter dialog box (see “Display Filter” on page 103).
You can use this function to verify completion of your Continuous Access operations.
Note: You can use
the snapshot
function only while client file access is enabled. When client file access is not enabled, the
Export button (the button for the snapshot function) is not displayed on the Pair Operation window. For
the
further information on the client file access settings, see the HP StorageWorks XP24000 Remote Web
Console User’s Guide. Table 22 on page 104 describes the Snapshot function. Figure 45 on page 104
showsanexample of aContinuousAccesssnapshot file.
Table 22 Sn
apshot Function
Data format Text file. Please see the example shown in Figure 45 on page 1 04.
Target dat
a
The Continuous Access pairs to be reported are determined by the selections on the
Display Filter dialog box.
Termination
When Subsystem or an LDKC is selected in the tree, you can stop the process by
clicking the Cancel button in the dialog box displayed during the execution of the
Snapshot
function.
Initialization
Each time the Export command is selected, the previous status data is deleted and
the new data is written.
Note: If # is added to the end of the number for an LDEV on the primary site (for example, 00:00:3C#),
the
LDEV is an external volume. For details on external volumes, see the HP StorageWorks XP24000
External Storage Soft ware User’s Guide.
Note: The host group name of an LU on the primary site is indicated up to 8 characters.
104
Performing Continuous Access Pair Operations