HP StorageWorks XP24000 Continuous Access Software User and Reference Guide, v01 (T5278-96002, June 2007)

• Diff : The differential data setting (bitmap table managed by cylinder o r track) .
• CTG: Consistency group number (00-7F) of the pair (only for Asynchronous pairs).
• ErrLvl: Errorlevel (group or LU)ofthe pair(only forAsynchronouspairs).
• Sync: During the copy process, the percentage of completion of the copy operation is displayed.
During the split volume process, the concordance ratio of the specified volume is displayed.
• CLPR: The number and name of the CLPR to which the volumes forming the pairs belong. For
further information on CLPRs, see the HP StorageWorks XP24000 Disk/Cache Partition User’s
Guide.
Note: The S/N, SSID, and Fence columns can be blank while a Continuous Access pair is in transition to
the
SMPL status. To display the latest information in these c olumn s, refresh the screen.
Display Filt
er
The Display
Filter dialog box (see Figure 44 on page 103) allows you to control which volumes are
displayed i
n
the list and which volumes are reported in the Continuous Access snapshot file (see
“Snapshot Function” on page 104). To open the D isplay Filter dialog box, click the Display Filter button on
the
Pair Operation window.
Note: You must close the Display Filter dialog box to use other dialog boxes.
The select
ed
item in the tree (Subsystem, LDKC, CU grouping, CU, por t, or GID) d etermines which
display fil
ter settings are available. When Subsystem or an LDKC is sele cted, all settings on the Display
Filter dialog box a re available. When a CU is selected, the CU setting is not available. When a port
is
selected, the port setting is not available. When a GID is selected, the group setting and p ort
setting a
re not available. When a CU grouping or a CU is selected, the GID and the Port lists display
ALL and
cannot be changed.
Figure 44 Dis pl ay Filter Dialog Box
GID: Allows you to select the GI D (or all GIDs) to be displayed. GID means host group number.
Port:
Allows you to select the port (or all ports) to be displayed or to enter the port number directly.
Note:
You can specify the por t number with two characters. For instance, you can abbreviate CL1-A as 1A. You
can
also enter the port number in both lowercase and uppercase characters.
CU:Al
lows you to select the CU (or all CUs) to be displayed.
Type: Allows you to select the pair type, sync or async (or all types), to be d isplayed.
P-VOL/S-VOL: Allows you to select the volume type, P -VOL or S-VOL (or all types), to be displayed.
XP24000ContinuousAccessSoftwareUserand ReferenceGuide
103