HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

• Operation Date/Time: The date and time when the operation was completed.
• Operation: The operations are:
Pair definition: A data volume pair was defined.
Paircreate Start: Creation of the data volume pair was started.
Paircreate Complete: Creation of the data volume pair was finished.
Pairresync Start: Restoring the data volume pair was started.
Pairresync Complete: Restoring the data volume pair was finished.
Pairsplit-r Start: Splitting (Suspending) the data volume pair was started.
Pairsplit-r Compl ete: Splitting (Suspending) the data volume pair was finished.
Pairsplit-r(Failure): The data volume pair was split (suspended) b ecause of a failure.
Pairsplit-S Start: Releasing the data volume pair was started.
Pairsplit-S Complete: Releasing the data volume pair was finished.
Status
Change by MCU(SM PL to COPY): The status of the data volume pair was changed from
SMPL to COPY because of an o peration from the primary storage system.
Status
Change by MC U(SMPL to PAIR): The status of the data volume pair was changed from
SMPL to PAIR bec ause of an operation from the primary storage system.
Status
Change by MCU(COPY to PAI R): The status of the data volume pair was changed from
COPY to PAIR because of an operation from the primary storage system.
Status
Change by MC U(CO PY to PSUS/PSUE) : The status of the da ta volume pair was changed
from COPY to PSUS or PSUE because of a n operation from the primary storage system.
Status
Change by MCU(PA IR to PSUS/PSUE): The status of the data volume pair was changed
from PAIR to PSUS or PSUE because of an o peration from the p rimary storage system.
Status
Change by MCU(PAIR to SMPL): The status of the data volume pair was changed from
PAIR to SMPL because of an operation from the primary storage system.
Status
Change by M CU(COPY to SMPL): The status of the data volume pair was changed from
COPY to SMPL be cause of an operation from the primary storage system.
Status Change by MCU(PSUS/PSUE to SMPL) : The status of the data volume pair was changed
from PSUS or PSUE to SMPL because of a n operation from the primary storage system.
Status
Change by MC U(PSUS/PSUE to COPY) : The status of the data volume pair was changed
from PSUS or PSUE to COPY because of an operation from the primary storage system.
Status
Change by RCU(Pairsplit-r Start): The status of the data volume pair was changed
because an operation for splitting a pair started at the secondar y storage system.
Status
Change by RCU(Pairsplit-r Compl ete): The status of the data volume pair was changed
because an operation for splitting a pair finished at the secondar y storage system.
Status
Change by RCU(PSUS/PSUE to SM PL; Pairsplit-S Start): An operation for releasing a
pair has been started at the secondary storage system. The status of the data volume pair will
change from PSUS or PSUE to SMPL.
Status
Change by RCU(COPY to SMPL; Pairsplit-S Star t): An operation for releasing a pair
has
been started at the secondary storage system. The status of the data volume pair will
change from COP Y to SMPL.
Status
Change by RCU(PAIR to SMPL; Pairsplit-S Start): An operation for releasing a pair
has
been started at the secondary storage system. The status of the data volume pair will
change from PAIR to SMPL.
Status
Change by RCU(Pairsplit-S Complete): The status of the data volume pair was changed
because an operation for releasing a pair finished at the secondary storage system.
• JNL Group: The journal group number.
• Mirror ID:The mirror ID.
• VOL: The volume manipulated during the operation. This volume is located in the loca l storage
system. This num ber indicates LDKC:CU:LDEV (LDKC number, CU number, and LDEV number).
• Paired VOL: The volume paired with the manipulated volume. This volume is located in the
remote storage system. This number indicates LDKC:CU:LDEV (LDKC number, CU number,
and LDEV number).
• Copy Time: The time taken for the operation (from the start of the operation to the end).
Displayed only for Paircreate C om plete and Pairresync Complete operations.
Notes:
• The history information (that is, rows in the list) might not be d isplayed in chronological
descending order. To sort the information in descending (or ascending) order, click a header
in the
list.
92
Using
the Continuous Access Journal GUI