HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

Table 22 Logical Path Status
Status
Remarks
Normal
This path has been successfully established and can be used for Continuous
Access Journal remote copy activ ities.
Nothing
An operation for configuring or deleting this logical path is in progress.
Initialization Failed
An error occurred with the initialization of a connection between the local and
the
remote storage system. The probable causes are:
• No
cable is connected to the local storage system.
• No
cable is connected to the remote storage system.
• No
cable is connected to the network device that comes between the local
and the remote storage system.
Communication Time
Out
This status indicates one of the following:
• A
timeout error has occurred between the primary and the secondar y storage
systems.
• A
logic error was detected between the primary and the secondary storage
systems.
Resource Shortage
(Port)
The local storage system rejected the function for configuring a logical path
connection. All logical path resources in the local storage system might be used
for other connections.
Resource Shortage
(Pair-Port)
Theremotestorage system rejected thefunctionfor configuring a logical path
connection. All logical path resources in the remote storage system might be used
for other connections.
Serial Number
Mismatch
The serial number of the storage system connected to this logical path does not
match th
e
serial number specified by the Add D KC window.
Invalid Port The port is not an initiator port.
Pair-Port Number
Mismatch
This status indicates one of the following:
•
The specified port number is incorrect.
•
The port in the remote storage system is physically disconnected from the
local storage system.
Pair-P
ort Type
Mismat
ch
Theportonthe remote storagesystem isnot an RCUtargetport.
Communication
Failed
A communications timeout error has occurred on the path between the primary
and the secondary storage systems.
Deleting Logical Paths
Before deleting logical path(s), make sure that the remaining number of log-
ical paths will be greater than the minimum number of paths setting (see
“Changing Options for Logical Paths and Storage Systems” on page 101). The delete
path
operation will fail if the number of remaining paths is equal to or less than the minimum number of
pat
hs.
To delete logical path(s), follow the procedure below. Not only the primary storage system administrator
but also the secondary storage system administrator can perform this operation.
1. Ensure that the Remote Web Console main window is in Modify m ode.
For detailed information about how to do this, see HP StorageWorks XP24000 Remote Web
Con
sole
User’s Guide.
2.
Ensure that the DKC Operation window is displayed (see “DKC Operation Window” on page 85).
3. In
Display,select DKC.
4. Do either of the following:
XP24000 Continuous Access Journal Software User a nd Reference Guide
105