HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)

Figure 53 DKC Sta tus W in dow
The DKC Status window displays the following:
• List:
• No.:disp
lays serial numbers used for rows in the list
•
Path Status: indicates the status of a logical path (for details, see Table 22 on page 105)
• Port: ind
icates a port on the local storage system
• Pair-Port: indicates a port on the remote storage system.
• S/N: Indicates the serial number and LDKC number of the remote storage system.
• Control
ler
ID: Displays the controller I D and the model name of the remote storage system.
• Path Gr. ID: Indicates a path group ID.
• M-R Path: Indicates the type of channel interface between the local and the remote storage
systems. This column displays fibre.
• Minimu
mPaths: Indicates the minimum possible number of paths bet ween the loc al and the
remote storage systems.
• RIO MIH Time: Indicates the RIO MIH timer value, which is the wait time until a data transfer from
the
lo
cal
storage system to the remote storage system is comp lete.
Note :
RIO
MIH is a n acronym for r
emote I/O missing interrupt handler.
• DKC Registered: Indicates the date and time when the local and the remote storage systems are
associated with ea ch other.
• Last
Updated: Indicates the date and time when the last o peration on a logical path to the
remo
te storage system was per formed.
• Refresh the DKC Operation tab after this window is closed: If you select this check box, information
in the
DKC Operation window will be refreshed after you close the DKC Status window.
• Ref
resh: Refreshes the information in the DKC Status window.
• Close:Closes the DKC Status window.
104
Configuring Storage Systems and Logical Paths