HP StorageWorks XP Continuous Access User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1711-96025, May 2011)

Table 12 Combining XP Continuous Access functions with other XP software products (continued)
Can volumes be used as
XP Continuous Access
Asynchronous S-VOL?
Can volumes be used
as XP Continuous
Access Asynchronous
P-VOL?
Can volumes be used
as XP Continuous
Access S-VOL?
Can volumes be used
as XP Continuous
Access P-VOL?
Functions and
volumes
NoNoNoNoPool-VOL
Flex Copy XP
YesYesYesYesExternal open-system
volume that is not
used as a P-VOL or
S-VOL of a Flex Copy
XP pair
NoNoNoNoExternal open-system
volume that is used
as a P-VOL or S-VOL
of a Flex Copy XP
pair
Auto LUN XP
Yes
NOTE: If the source
volume is used as an
S-VOL, volume
migration stops.
Yes
NOTE: If the source
volume is used as a
P-VOL, volume
migration stops.
Yes
NOTE: If the source
volume is used as an
S-VOL, volume
migration stops.
Yes
NOTE: If the source
volume is used as a
P-VOL, volume
migration stops.
Source volume (when
volume migration is
in progress)
YesYesYesYesSource volume (after
volume migration is
finished)
NoNoNoNoTarget volume
NoNoNoNoReserved volume
XP Continuous Access Journal
NoNoNoNoPrimary data volume
in COPY status
NoNoNo
However, the volume
can be used as an
S-VOL only when
restoring an XP
Continuous Access
pair or perform a
RAID Manager
horctakeover
operation.
YesPrimary data volume
in PAIR status
NoNoNo
However, the volume
can be used as an
S-VOL only when
restoring an XP
Continuous Access
pair or perform a
RAID Manager
horctakeover
operation.
YesPrimary data volume
in PSUS status
40 Preparing for XP Continuous Access operations