HP StorageWorks RAID Manager XP User's Guide (T1610-96004, November 2005)

196 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
“MINAP” shows the minimum active paths to a specified group on the
P-VOL. If the array firmware does not support tracking the number of
active paths, then "MINAP" will not be displayed (as below).
“LDEV = BLOCKED indicates failure to link to an E-LUN by CA
BC:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR ]
BC with CT Group:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR CTGID = 1 ]