HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 87
Auth Info (Host) Operation
[LUNM]
Logical Unit Number Manager function
Auth Info (Host)
Auth Info (Host) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 43.
Table 43 Detailed Information for Auth Info (Host) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Auth Info(Host),,Normal
end,Seq.=xxxxx
+{Port,HostGrpID,Kind,UserName,Change
UserName,Protocol}=[{1E,0x01,Add,user1,-,CHAP},
{3E,0x01,Change,user2,user22,CHAP},{5E,0x01,Delete,user3,-,CHAP}],Num. of
Info=3
Item Description
Port The name of the port where the host group has been added.
HostGrpID The host group number newly added.
Kind The setting status of user authentication information.
Add: add user authentication information, Change: change user authentication
information,
Delete: delete user authentication information
UserName The user name where user authentication information has been set. The user name before
change is indicated when "Kind" is set to "Change".
Change UserName The user name after change is indicated when "Kind" is set to "Change". A hyphen (-) is
indicated when "Kind" is set to "Add" or "delete".
Protocol The authentication type which is CHAP (Challenge Handshake Authentication Protocol).
Num. of Info The number of user authentication information set.