HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 45
4BASE function
ChangeMode Operation
[Base]
BASE function
ChangeMode
ChangeMode operation
Modify
Modify is the selected parameter. This operation uses the following parameters, as shown in
Table 8.
Table 8 Parameters for ChangeMode Operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[Base],ChangeMode,Modify,No
rmal end,Seq.=xxxxxx
Parameter Description
Modify Change to Modify mode
View Change to View mode
View_Logout Change to View mode is requested by RMI server at log-out
View_TimeOut When the Modify mode takes timeout or time-out occurs because of no response
from the client, change to the View mode is requested by RMI server.
View_Forced Change to View mode is forcefully requested.
View_Forced_All Change to View mode is forcefully requested to all users.