HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Appendix A - Audit Log File Output by Function270
• Changing Host Group
• Adding or deleting paths
• Adding, changing, or deleting WWN
Note 4
When you set two or more port settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as
one entry.
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
Change 1 → Change 2: Log information is output for the Change 2 operation.
Note 5
When you set two or more LUSE settings, the following conditions apply:
• When you perform two or more operations for one target, the log information is output as
one log information file. For example, if you have created one LUSE volume and then created
another LUSE volume using the previously-created LUSE volume, the log information is output
just as "Make LUSE".
• The log information is output in the order of the operations performed.
• If you perform the following operations at the same time, the following happens:
• Create LUSE volume → Delete LUSE volume: The operations cancel each other, and
the log information is not output.
• Create LUSE volume 1 → Create LUSE volume 2 → Create LUSE volume 3
using LUSE volume 1 and LUSE volume 2 → Delete LUSE volume 3: Log
information is output only for the Create LUSE volume 1 operation and Create LUSE
volume 2 operation.
Note 6
The log information is output at the end, no matter when you perform the Cache Residency
Manager operation.