HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

External Storage XP Function210
D-Type The external subsystem information (Ex-Dev Info) of the mapped external volume.
Capa(blocks) The capacity of the mapped external volume by block.
Group The group number of the mapped external volume.
IOSup Indicates whether the I/O suppression mode is enabled or disabled; Enable: Mode is
enabled, Disable: Mode is disabled.
CM Indicates whether the cache mode is enabled or disabled; Enable: Mode is enabled,
Disable: Mode is disabled.
CLPR The CLPR number of the CLPR set to be used to access the mapped external volume.
Type The emulation type of the mapped external volume.
UsedCapa(blocks) The capacity of the volume used by Data Retention Utility.
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
xxxx: Part code
yyyyy: Error code
CU:LDEV The CU and LDEV numbers of the mapped external volume.
Capa(MB) The capacity of the mapped external volume.
The unit is megabyte (MB).
SSID Indicates SSID.
Num. of LDEVs The number of mapped external volumes.
Port The port name of the local subsystem.
WWN The WWN of the external subsystem.
This index is output for the top WWN and the others are omitted.
"-" shows the WWN is the same as the top WWN.
LUN The LUN of the external volume.
Num. of Groups The number of external volume groups set.
Item Description