HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

TrueCopy (TC) z/OS Function174
Add Pair Operation
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Add Pair
Add Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 122.
Table 122 Detailed Information for Add CTG Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [TC z/OS(R)],Add Pair,,Normal
end,Seq.=xxxxxx
+{M-VOL(CU:LDEV),R-VOL(LDEV),S/N,SSID,ControllerID,Type, Initial Copy,
Fence Level,Copy Pace, Priority,Diff,CFW,DFW,CTG, Error Level,Result}=
-{0x00:0x00,0xFF,99999,0x0004,4,Async,Entire,Never,15,032,Auto,Only
M-VOL,-,0x00,Group,
Normal End}, (snip)
-(snip), Num.of Pairs=xx
Item Description
M-VOL(CU:LDEV) The CU number and the LDEV number of the volume specified to the main volume when
the pair is created.
R-VOL(LDEV) The LDEV number of the volume specified to the remote volume when the pair is created.
S/N The serial number of the device.
SSID Indicates SSID.
Controller ID The controller ID.
Type The update copy mode set; Sync: Synchronous mode, Async: Asynchronous mode
Initial Copy The initial copy mode set.; Entire: All copy, None: No copy
Fence Level The fence level set (the condition that MCU rejects the write operation to the main
volume.)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Copy Pace The initial copy speed set (the number of tracks you can copy at a time).