HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Performance Control Function154
Set Prio Port Operation
[PFC]
Performance Control function
Set Prio Port
Set Prio Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 106.
Table 106 Detailed Information for Set Prio Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PFC],Set Prio Port,,Normal
end,Seq.=xxxxx
+{Port,Priority,Use,Threshold/Upper
Limit,Mode}=[{1A,Non-Prio,Enable,XXXXXXXX,IOPS},
{3A,Prio,Disable,,}],Num. of Ports=2
Item Description
Port The port name.
Priority The attribute set to the port.
Prio: Prioritized port, Non-Prio: Non-prioritized port
Use Indicates whether the threshold is set or not in case of the prioritized port and whether the
upper limit value is set or not in case of non-prioritized port.
Enable: Value is set, Disable: Value is not set.
Threshold/
Upper Limit
The threshold in case of prioritized port and the upper limit value in case of
non-prioritized port. This value is output only when the threshold or the upper limit value
is set.
Mode The type of rate used for upper limit control and threshold control.
IOPS: I/O rate, KB/s: Transfer rate
This value is output when the threshold or the upper limit value is set.
Num. of Ports The number of ports that the setting is changed.