HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 149
23 Performance Control Function
Change PPCGrp Operation
[PFC]
Performance Control function
Change PPCGrp
Change PPCGrp operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 100.
Table 100 Detailed Information for Change PPCGrp Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PFC],Change PPCGrp,,Normal
end,Seq.=xxxxx
+{PPC
Group,Priority,UpperLimit,Mode}=[{XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}]
,
Num. of PPC Groups=1
Item Description
PPC Group The SPM group name.
Priority The attribute of the host bus adapter in the SPM group after change.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
Upper Limit The upper limit value when the attribute is set to Non-Prio.
When the attribute is set to Prio, this value is not output.
Mode The type of rate used for upper limit control.
IOPS: I/O rate, KB/s: Transfer rate
When the attribute is set to Prio, this value is not output.
Num. of PPC Groups The number of the SPM groups that the setting is changed.