HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Remote Control Unit (RCU) Function124
Table 80 Detailed Information for Delete Path Operation
Delete RCU Operation
Example 1 (when CU Free is used)
Example 2 (when CU Free is not used)
[RCU]
Remote Control Unit function
Delete RCU
Delete Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 81.
Item Description
S/N The serial number of the device of RCU where the path has been deleted.
Path Gr. ID The path group ID of the path deleted. When the path group is a default setting,
"Default" is output.
Controller ID The controller ID of the RCU where the path has been deleted.
SSID Indicates SSID.
MCU Port The port number of MCU.
RCU Port The port number of RCU.
Num. of Port Pairs The number of path pairs deleted.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal
end,Seq.=xxxxx
+{S/N,,}={99999,Default,4}
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal
end,Seq.=xxxxx
+{S/N,SSID}={99999,0x0004}