HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 121
Table 78 Detailed Information for Add RCU Operation
Change RCU Option Operation
Example 1 (when CU Free is used)
Example 2 (when CU Free is not used)
Item Description
S/N Indicates a serial number of the registered RCU device.
Path Gr. ID The path group ID of the registered RCU. When the path group ID is default setting,
Default is output.
Controller ID The controller ID of the registered RCU device.
MCU The CU number of the connected CU.
RCU The CU number of the paired CU.
SSID The SSID of the registered RCU.
MCU Port The port number of MCU.
RCU Port The port number of the registered RCU.
Min. Path The number of set minimum paths.
MIH Time(s) The value of set RIO MIH (Remote I/O Missing Interrupt Handler) timer (wait time until
data copy from MCU to RCU is completed). The unit is second.
Round Trip Time(ms) The round-trip response time set (delay time for round-trip remote I/O). The unit is
millisecond. This value is output when Continuous Access XP or TrueCopy for z/OS is
used.
Incident The set incident of the RCU. This value is output only when TrueCopy for z/OS is used.
"only to RCU host " or " to any host " is output.
FREEZE Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support is enabled or
disabled. This value is output only when TrueCopy for z/OS is used.
Enable or Disable is output.
Num. of Port Pairs The number of port pairs set.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Change RCU Option,,Normal
end,Seq.=xxxxx
+{S/N,Path Gr. ID,Controller ID,Min. Path,MIH Time(s), Round Trip
Time(ms),Incident,FREEZE}={99999,
Default,4,08,015,001,only to RCU host,Disable}