Hitachi Universal Replicator for z/OS User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1778-96021, May 2011)

(2) The number of mirrors to be added by the Add Pair window
(3) The number of mirrors for volumes in the Preview list in the Pair Operation window.
• Set: Applies the settings to the Preview list in the Pair Operation window (“Pair Operation
Window” (page 136)).
• Cancel: Discards the settings.
Displaying Detailed Information about a Pair of Data Volumes
The Detailed Information window allows you to view detailed information about a pair of data
volumes.
To display detailed information about a pair of data volumes, follow the procedure below. Not
only the primary storage system administrator but also the secondary storage system administrator
can perform this operation:
1. Ensure that the Pair Operation window is displayed.
2. In the tree of the Pair Operation window, select and right-click a pair.
NOTE: You cannot select more than one pair.
3. From the pop-up menu, select Pair Status.
4. In the Detailed Information window (“Pair Status Panel” (page 147)), view detailed information
about the pair.
5. After you finish viewing the information, select Close to close the Detailed Information window.
Figure 66 Pair Status Panel
Displaying Detailed Information about a Pair of Data Volumes 147