Hitachi TrueCopy (TM) for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5211-96014, May 2011)

Table 67 CQUERY Output for ESCON Interface and Fibre Channel Interface
Fibre Channel InterfaceParameters
Mode 484 ONMode 484 OFF
SAID of MCU
(x'00' and the port number)
Bit 0-3:RCU controller ID
x2-xF:Number
stands for the RCU
controller ID.
Bit 4-7:FREEZE option
x0:keep the status
x1:Enabled
x2:Disabled
aa
MCU port number (0x00-0xff) bb
SAID of RCU
(x'00' and the port number)
RCU port number (0x00-0xff) cc
CU number (0x00-0xfe) dd
“CQUERY Output Example: R-VOL/FORMAT/VOLUME” (page 209) shows the output of the CQUERY
command with the VOLUME parameter issued to a TrueCopy for Mainframe Asynchronous R-VOL.
• The LIC LEVEL value in the following figure is example only, not valid number.
• The WWNN value in the following figure will be valid if mode 484 is ON. If mode 484 is
OFF, the WWNN value is example only, not valid number.
• If mode 484 is ON, the status of path as using the Fibre Channel interface will be displayed.
If mode 484 is OFF, ESCON will be indicated for the path status.
• If the former type storage system or the storage system of XP12000/XP10000 Disk Array
microcode version 50-05-XX-XX or earlier is connected, mode 484 must be OFF.
208 Using PPRC Commands for TrueCopy for Mainframe