Hitachi TrueCopy (TM) for Mainframe User Guide: HP XP24000 Disk Array, HP XP20000 Disk Array (T5211-96014, May 2011)

Table 57 TrueCopy for Mainframe Operations versus PPRC TSO and ICKDSF Commands (continued)
DescriptionCommand
Issued to:
ICKDSF CommandTSO CommandTrueCopy for
Mainframe
Operation
Must be performed using
the TrueCopy for
Mainframe software.
MCU/RCU——Group Status
Must be performed using
the TrueCopy for
Mainframe software.
MCU——Delete Group
Establishes a TrueCopy for
Mainframe pair and sets
the initial copy and pair
options (copy mode =
synchronous or
asynchronous only, priority
= 0, CFW data = copy to
R-VOL, DFW to R-VOL = not
required). TrueCopy for
Mainframe supports the
optional MODE, PACE,
and CRIT parameters. The
MSGREQ parameter
defaults to NO (not
applicable to TrueCopy for
Mainframe Asynchronous).
M-VOLPPRCOPY ESTPAIRCESTPAIR
(MODE=COPY)
Add Pair
Suspends a TrueCopy for
Mainframe pair (or
TrueCopy for Mainframe
Asynchronous group).
TrueCopy for Mainframe
supports the optional
PRIMARY parameter. See
CAUTION below on the
QUIESCE parameter.
M-VOL or R-VOLPPRCOPY SUSPENDCSUSPENDSuspend Pair
Releases a TrueCopy for
Mainframe pair (or
TrueCopy for Mainframe
Asynchronous group) from
the MCU.
M-VOLPPRCOPY DELPAIRCDELPAIRDelete Pair (to MCU)
Releases a TrueCopy for
Mainframe pair (or
TrueCopy for Mainframe
Asynchronous group) from
the RCU.
R-VOLPPRCOPY RECOVERCRECOVERDelete Pair (to RCU)
Displays the TrueCopy for
Mainframe and TrueCopy
for Mainframe
Asynchronous pair status of
the volume. TrueCopy for
Mainframe supports the
optional
FORMAT/UNFORMAT and
VOLUME/PATHS
parameters.
M-VOL or R-VOLPPRCOPY QUERY/
VOLUME
CQUERY/ VOLUMEDetailed Information
Overview of PPRC Commands 193