Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

3-4 Preparing for TrueCopy for z/OS Operations
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
• Storage Navigator software and TrueCopy for z/OS license code(s):
– The USP V Storage Navigator software is required for USP V TrueCopy
for z/OS operations. The TrueCopy for z/OS software is a component of
the USP V Storage Navigator.
– The TrueCopy for z/OS license key code(s) are required to enable the
TrueCopy for z/OS software on the USP V storage system. Separate
license codes are required for each USP V storage system.
Note: Administrator or TrueCopy for z/OS write access to the USP V
Storage Navigator software is required to perform TrueCopy for z/OS
operations. Users without Administrator or TrueCopy for z/OS write access
can only view TrueCopy for z/OS information.
Note: You must operate the USP V Storage Navigator software in Modify
mode to perform TrueCopy for z/OS operations. Users in view mode can
only view TrueCopy for z/OS information.
• About the license of TrueCopy Asynchronous for z/OS:
If you want to use TrueCopy for z/OS Async, you must install not only
TrueCopy Asynchronous for z/OS but also for TrueCopy for z/OS. So, you
need license codes for both TrueCopy Asynchronous for z/OS and TrueCopy
for z/OS. Also, the license capacity of TrueCopy for z/OS and the license
capacity of TrueCopy Asynchronous for z/OS must satisfy the following
equation:
License capacity of TrueCopy for z/OS ≥ License capacity of
TrueCopy Asynchronous for z/OS