Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

About TrueCopy for z/OS Operations 2-41
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
Business Continuity Manager Support
The USP V on which TCz is installed support the Business Continuity Manager
commands. If the host system console issues the Business Continuity Manager
commands to the USP V, the TCz pair operations can be performed. The
Business Continuity Manager commands allow you to add pairs, suspend pairs,
resynchronize pairs, release pairs, monitor the pair status, add RCU, and
delete RCU. Table 2-11 and Table 2-12 give the USP V adaptor ID (SAID)
values. For further information and instructions on Business Continuity
Manager, please refer to the Business Continuity Manager User's Guide.
Note: Although the same TCz pair operations may be performed by using
Business Continuity Manager or PPRC, Business Continuity Manager and PPRC
are independent functions. Do not use Business Continuity Manager and PPRC
for the same pair operation.
Table 2-9 lists the Business Continuity Manager commands corresponding to
PPRC commands. For further information on the PPRC commands. For further
information on Business Continuity Manager, please refer to the Business
Continuity Manager User’s Guide.
Table 2-9 Business Continuity Manager Commands Corresponding to
PPRC Commands
PPRC commands Parameter Business Continuity Manager
commands
Support type
DEVN config
PRIM config
SEC config
LINK config
CGROUP Not supported
CESTPATH
RESETHP
YKBLDPTH
Not supported
DEVN config
PRIM
*2
config
SEC config
MODE
Command (RESYNC)
Parameter (NOCOPY)
PACE config (CopyPace)
CRIT config (ErrorLevel)
MSGREQ Not supported
CESTPAIR
ONLINSEC
YKMAKE/
YKRESYNC
Not supported