Hitachi TrueCopy for IBM z/OS User and Reference Guide (T5211-96001, June 2007)

6-2 Performing TrueCopy for z/OS Pair Operations
Hitachi Universal Storage Platform V TrueCopy for IBM z/OS User’s Guide
Creating TrueCopy for z/OS Pairs
You can start establishing the TCz pairs as soon as you have:
• Identified the volumes which will become the TCz M-VOLs and R-VOLs
• Ensured that all system and TCz requirements have been met
• Assessed TCz Requirements
• Completed hardware and software installation
• Configured the MCUs and RCUs for TCz operations
The Add Pair dialog box (see Figure 6-1 and Figure 6-2) allows you to add new
TrueCopy for z/OS pairs and set the initial copy options and pair options for
the new pairs. To open the Add Pair dialog box, click the Pair Operation tab,
select a CU from the tree, select the desired device from the list, right-click
and click Add Pair command. And then select the desired copy mode (sync or
async) for the new pair(s).
Figure 6-1 Add Pair Dialog Box for Synchronous Pairs