HP StorageWorks Continuous Access EVA Administrator Guide (T3687-96043, December 2005)

CXO8173B

4 6

7 8

1. Local management server

2. Remote management server

3. Local array 1 4. Local array 2

5. Remote array 1

6. Remote array 2

7. Management zone A 8. Management zone B

9. Remote replication management zone 10. Fabric

Figure 7 Loca l a nd remote management server zones

For instructions to create zones, see your switch user guide. Also follow the best practices in Volume 2 of

HP StorageWorks SAN design reference guide.

IMPORTANT:

When adding array controllers to a zone, use the array's world wide name, not the controller's port world

wide names. The array's world wide name is a hexadecimal number that begins with 50 and ends with 0,

for example, 50:00:1f:e1:00:15:40:80. The controller port world wide names are similar but end in digits

greater than 0, for example, 50:00:1f:e1:00:15:40:88 and 50: 00:1f:e1: 00:15:40:8d.

Zoning also allows you to limit visible connections to the supported maximums. Create separate zones for

resources that exceed the following maximums:

• Maximum number of EVAs in a SAN

• Ma ximum number of H BAs per EVA controller (see Volume 3 of HP StorageWorks SAN design

reference guide)

• Ma ximum number of switches in a SAN (see Volum e 2 of HP Storag eWorks SAN design

reference guide)

Exclude the following from remote replication zones:

HP StorageWorks Continuous Access EVA administrator guide