HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Using the Graphical User Interface 93
Using the Graphical User
Interface
Deleting Table Entries
1 On the Secure Manager screen, select the table entries you want to delete.
Multiple entries can be selected.
2 Click Delete Entry.
3 Click OK.
Copying LUN Permissions
1 On the Secure Manager screen, click Copy Permissions.
2 Enter the number of the LUN from which permissions will be copied.
3 Enter the number of the LUN to which permissions will be copied.
4 Click OK.
Each table entry for the source LUN is duplicated for the new LUN.
Writing the Secure Manager Table to the Array
1 On the Secure Manager screen, click Write Table.
2 Select the desired write mode: Append or Clear.
3 Click OK.
Managing Host Port Behavior Table
The host port behavior table management screen is accessed as follows:
1 Click the Configuration tab.
2 Click Host Port Behavior.
Reading the Host Port Behavior Table from the Array
1 On the Host Port Behavior screen, click Read Table.
2 Click OK.
Adding New Hosts
1 On the Host Port Behavior screen, click Add Entries.
2 Click Add New Host.
3 Enter the host name in the Host Name field.
4 Click OK.