HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Using the Graphical User Interface 89
Using the Graphical User
Interface
Performing Management Tasks from the GUI
The following section describes how to use the GUI to perform some of the
common tasks involved in the day-to-day management of the array. This is
not a complete list of the management tasks available in the GUI. For a
complete list of the GUI functionality, see Table 7.
These, and all other tasks available from the GUI, are described in the on-line
help. The on-line help should be your primary source of information when
using the GUI to manage the array.
Checking Array Status
1 Click the Status tab.
2 Click Array Status to display overall array information
Click Component Status to display status information on components
within the array.
Managing Array Capacity
Displaying Capacity Status
1 Click the Status tab.
2 Click Capacity to display a graph representing the current allocation of the
array capacity.
Creating a LUN
1 Click the LUN Management tab.
2 Click Logical LUNs.
3 Click Create LUN.
4 In the dialog that appears, enter the parameters for the LUN.
5 Click OK.
Caution Deleting a LUN