HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Installing Command View SDM 73
Installing
Command View SDM
CD:
/CD Root/
|SMI-S/
|slpd/
|linux/
|slpd.rpm
Windows
Windows Binaries Location on the CD
The Windows slpd binaries are located in the following location on the
Command View SDM CD:
/CD Root/slpd/windows/setup.exe
Managing Passwords for VA LUN Security/ LUN Masking Access
The VA provides the capability to password-protect access to the LUN security
management interface. The password is entered when the system is configured
and is maintained within the array.
Use the LunMasking Password utility to access a password-protected LUN
through the SMI-S interface. The password is stored in an encrypted form on
the management host. The management host is the system where
hpSMISCIMOM runs as a service and is used to establish all SMI-S
management sessions. If you change the password, you must change it in the
array. Use the LunMasking Password utility to re-enter the new password.
Location of the utility:
HP-UX/ Linux
/opt/SMI-S/cimom/VA_LunMasking_PasswdUtility.sh
Windows
<DriveLetter:\>Program Files\Hewlett-Packard\SMI-
S\cimom\VA_LunMasking_PasswdUtility.bat
The LunMasking password utility supports the following options:
1 Add—Add a new password for the array.
2 Delete—Delete a password for the array.