HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

72 Installing Command View SDM
SLP DAEMON Installer
The SMI-S server supports Service Location Protocol Daemon (SLP) discovery
and it is mandatory to have the "slpd" (SLP daemon) running on the
management host. The SLPD binaries are located on the Web and on the
Command View SDM CD.
Note After you install the SLP Daemon, a service titled Service
Location Protocol is created in the machine.
SLP Binaries Location on the Web and CD
HP-UX
HP-UX Binaries Location on the Web
www.software.hp.com
HP-UX 11.11 Binaries Location on the CD
The HP-UX 11.11 slpd binaries are located on Web and Command View CD
as follows:
CD:
/CD Root/
|SMI-S/
|slpd/
|hpux/
|slpd-11.11.depot
HP-UX 11.23 Binaries Location on the CD
For HP-UX 11.23,
slpd is bundled with the operating system.
Linux
Linux Red Hat Binaries Location on the Web
http://www.openslp.org/download.html (openslp-1.0.11-1.i386.rpm)
Red Hat Linux 7.1 and Red Hat Linux Advanced Server 2.1 Binaries Location
on the CD
The Linux
slpd binaries are located on the Web and the Command View SDM
CD in the following locations: