HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Installing Command View SDM 65
Installing
Command View SDM
Linux
■ Execute the rpm -qa |grep SMI-S command on the destination machine
to view the following SMI-S VA packages:
— SMI-S_VA-1.09.00-1
— SMI-S_CIMOM-1.0.2-1
Note The CIMOM, by default, runs in the SSL mode on port 5989.
When SSL is disabled, the CIMOM runs on port 5988.
Starting and Stopping SMI-S VA
Windows
The display name of the service is HP StorageWorks SMI-S CIMOM (the
service name is
hpSMISCIMOM). The service is automatically installed and
started after installation.
To start or stop SMI-S VA on Windows 2000 or Windows Server 2003:
1 Click Control Panel.
2 Click Administrative Tools.
3 Click Services.
4 Select HP StorageWorks SMI-S CIMOM and click Start to start the
service or click Stop to stop the service.
Note On a Windows NT machine, click Services from the Control
Panel and follow step 4.
HP-UX and Linux
The name of the SMI-S VA daemon is hpSMISCIMOM. The daemon can be
started by running the script SMIS_trigger located in the /opt/SMI-S/
cimom/ directory with the start option.
$./SMIS_trigger start
The SMIS_trigger also supports restarting of the service.
$./SMIS_trigger restart