HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Installing Command View SDM 55
Installing
Command View SDM
Starting/Stopping HostAgent and OpenDIAL
The HostAgent and OpenDIAL services (or daemons) are installed with
Command View SDM. These services are started automatically during
installation and any time the host is restarted. Both services must be running on
the host for Command View SDM to operate. If these services are not running,
they must be started manually. HostAgent and OpenDIAL are not needed on a
remote Command View SDM client and can be stopped.
To start or stop HostAgent and OpenDIAL you must login as root or superuser
(for HP-UX/Linux) or have Administrator Privileges (for Windows).
HP-UX and Linux
Individual scripts are used to start or stop both services.
■ To stop HostAgent and OpenDIAL, enter the following command:
/opt/sanmgr/commandview/client/sbin/HA_Dial_Stop
■
To start HostAgent and OpenDIAL, enter the following command:
/opt/sanmgr/commandview/client/sbin/HA_Dial_Start
Windows 2000 and Windows 2003
Note If Command View SDM is installed on an HP OpenView SAM
management station, the HostAgent and OpenDial services are
not used. The HP OpenView Storage Management Server
service is used to integrate the Command View SDM software
with Storage Area Manager. This is the service you must stop/
start in this environment.
Although it is possible to start or stop HostAgent and OpenDIAL from the
Services dialog, it is recommended that you use the script files described
below. This will ensure that the services are stopped and started in the proper
order.
■ To stop HostAgent and OpenDIAL, enter the following from a command
prompt:
<drive>:\Program Files\Hewlett-Packard\sanmgr\command-
view\client\sbin\HA_Dial_Stop