HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

30 Installing Command View SDM
Installing Command View SDM on HP-UX
The following procedure describes the steps involved in installing the
Command View SDM software on an HP-UX host or client.
Minimum System Requirements for HP-UX
Before installing the Command View SDM software, verify that the host meets
the following minimum requirements.
Locating HP-UX Patches
CV SDM 1.09 delivers version 1.4.2 of the Java Runtime Environment for all
HP-UX versions. You must install the relevant Java 1.4.2 patches for each HP-
UX version from the following site:
http://www.hp.com/products1/unix/java/patches/index.html
Refer to the HP web site for the latest patch bundle information.
http://www.hp.com/products1/unix/java/
Host
■
HP-UX 11.00/11.11/11.23 IA/11.23 PI on PA/
11.23 PI on IA (plus the Support Plus Hardware
Enablement Bundle, version September 2001 or later)
■ RAM: 1 GB
■ Screen Resolution: 800 x 600 (for the GUI)
(Recommended 1024 X 768)
■ Video Support: 64K colors or better
■ Disk Space for Logs: 16 Mbyte per 2 months
■ Disk Space: 60 Mbyte in the /var directory (for logs)
■ Directory Space for installation:
— /opt (230 Mbyte 11.00/11.11)
(350 Mbyte 11.23)
— /var (less than 1Mbyte for 11.00/11.11)
(1.3 Mbyte for 11.23)
— /etc, /usr, / (less than 1 Mbyte for 11.00/11.11/
11.23)