HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Command Line User Interface 147
Command Line User Interface
Examples
Set port behavior for host port 2 on controller 1 to NetWare on array serial
number 00786b5c0000.
armmgr -B NetWare M/C1.H2 00786b5c0000
Assign an alias of AutoRAID1 to array serial number 00USP1001087.
armmgr -D AutoRAID1 00USP1001087
Select RAID level 1+0 for array identified by device file /dev/dsk/c2t0d0.
armmgr -C raid1+0 /dev/dsk/c2t0d0
Identify disk 6 in disk enclosure 3 on FC loop 2 on array AutoRAID3 by
flashing its LED.
armmgr -I JB3/D6 on AutoRAID3