HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

130 Command Line User Interface
armfeature
Description
The armfeature command installs upgrade licenses for increasing the
capacity limits for Business Copy VA and Secure Manager VA. Entitlement
licenses are purchased as separate options. With the purchase of an option,
you receive a license key which is installed using this command.
Note The license key used to implement the feature is case sensitive.
Make sure the key is entered exactly as generated. If the key is
entered incorrectly, the feature will indicate a status of Disabled.
Syntax
armfeature –r <array-id>
armfeature –a –f <featurestring> -k <key> <array-id>
armfeature -?
Options
-a Specifies that the new feature indicated by the -f parameter, with a key
value indicated by the -k parameter is to be written to the array. The
<featurestring> and the <key> values are taken from the Enablement
License certificate (or as provided by the supplier).
-f <featurestring> Specifies the string corresponding to the feature to be added. This string
is obtained during the product registration process.
-k <key> Specifies the key value for the new feature to be added. This value is
generated during the product registration process.
-r This specifies that the feature table should be read from the device and
displayed on the standard output. If no features are installed, the table
will be empty.
-? Display extended help message. Overrides all other switches.