HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

120 Command Line User Interface
-d [<FRULocation>] Display disk information.
If <FRULocation> is not given, display detailed information for all disks
installed in the array.
If <FRULocation>is given and specifies an enclosure (e.g., JA1), display
detailed information for all disks in the enclosure at <FRULocation>.
If <FRULocation> is given and specifies a disk (e.g., JA1/D1), display
detailed information for disk at <FRULocation> only.
-e [<FRULocation>] Display enclosure information.
If <FRULocation> is not given, display a summary listing of all enclosures.
If <FRULocation> is given and specifies an enclosure, display detailed
information for the enclosure at <FRULocation> only.
-f Display a listing of FRUs in the array. Include FRU location, description of
hardware, identification, and status.
-i [<HostName>] [ -b | -v ] Display the serial number, alias, world wide name, device file name and
unique name of all arrays connected to the host. <HostName> denotes
the remote host for which information will be displayed. If no value is
specified, local host will be assumed.
If the -b option is included, an abbreviated list is displayed. If the -v
option is included, a detailed list of devices, including all known preferred
management paths to each device, is displayed.
-L [<LUN>] [-r] Display LUN information.
If <LUN> is not specified, display detailed information for all LUNs on the
array. If <LUN> is specified, display information only for that LUN. If the
-r option is included, the allocated space for all the LUNs are displayed.
If the LUN is a business copy, then business copy information will be
displayed.
If the LUN has one or more business copies, list how many and the
corresponding LUN ID. Also, its active and its attachment states with its
used capacity will be displayed. All listed LUNs will be shown with
corresponding world wide names (WWN).
-p [<FRULocation>] For firmware versions HP15 or greater (VA7100/7400) and A000 or
greater (VA7410/7110), this option displays all port settings for the port
identified by <FruLocation>. This includes Port Loop ID, Port Behavior,
Port Topology, Port Data Rate, and Queue Full Threshold. If
<FruLocation> is not specified, the data is displayed for all host and disk
ports.